User:MaurineLindquist
img width: 750px; iframe.movie width: 750px; height: 450px;
Setup and features guide for enkrypt wallet
Setup and features guide for enkrypt wallet
Click the puzzle piece icon in your browser toolbar, pin Enkrypt if it’s not visible, then select the purple cube. On the welcome screen, choose “Create a new wallet.” Write down the 12-word recovery phrase on paper–do not store it digitally, not in a screenshot, not in a cloud file. Store that paper in a fireproof safe. After confirming the phrase, set a strong password (minimum 12 characters with a special symbol). This password encrypts the local storage on that specific device only.
Immediately after creation, add a second account. Open the account dropdown in the top-left corner, select “Add account,” and choose a Bitcoin or Ethereum address. Each account generates an entirely separate key pair from the same master seed. Label them clearly: “Daily BTC,” “Savings ETH.” This prevents you from accidentally exposing high-value holdings during routine transaction signing.
To connect to networks beyond Ethereum mainnet, click the network icon in the header (it reads “Ethereum” by default). Scroll past the presets to find “Custom RPC.” For Polygon, paste the official RPC URL: https://polygon-rpc.com, set chain ID to 137, and symbol to MATIC. For BNB Chain, use https://bsc-dataseed.binance.org with chain ID 56 and symbol BNB. Repeat this for every chain you plan to use–Enkrypt stores each network’s data locally with no cloud sync.
For token management, toggle the “Hidden tokens” section under the “Tokens” tab. Any spam airdrop or dusted token should be moved here immediately. This keeps your main balance column clean and reduces the risk of accidentally interacting with malicious contracts. When sending funds, always double-check the recipient address against your transaction history. Enkrypt does not run automatic address checks–human eyeballs are the only safeguard.
If you need hardware integration, plug your Ledger or Trezor device via USB, open Enkrypt, select “Connect hardware wallet” from the account menu, and approve the connection on the hardware device. Once linked, you can view balances and sign transactions without the private key ever leaving the hardware. For daily use, keep the hardware wallet disconnected; only plug it in when you need to authorize a transaction.
Setup and Features Guide for Enkrypt Wallet
Enable hardware-level security by always creating your primary vault on a Trezor or Ledger device before connecting it to the Enkrypt extension. To initialize, download the browser plugin for Chrome or Firefox, then select "Create a New Vault." Write down your 12-word backup phrase on steel plates, not paper, and store it in a fireproof safe. After vault creation, ignore the default Ethereum mainnet; immediately add networks like Polygon, Gnosis Chain, and Arbitrum via the network dropdown menu. For each network, configure custom RPC endpoints (e.g., Infura or Alchemy for low latency). The non-custodial structure means your private keys remain encrypted locally–never exposed to remote servers.
For controlling token activity, enable hidden account abstraction through the "Advanced Settings" panel to batch multiple transaction signatures into one confirmation, cutting gas costs by up to 40% on optimistic rollups. Use the built-in NFT media viewer to inspect metadata directly on-chain from IPFS or Arweave gateways, bypassing centralized marketplaces. Staking functions target specific validators: delegate ETH directly through the Lido integration inside the "DeFi" tab, which calculates real-time APR based on your voting power. The "Portfolio" dashboard aggregates cross-chain balances via a local indexer, updating every 12 seconds–export this data as CSV for tax reporting. Disable Web3 permissions for dApps after each session using the "Connected Sites" manager to prevent silent drainers from accessing your addresses.
Step-by-Step Installation and Initial Account Creation for Enkrypt Wallet
Download the official Enkrypt application exclusively from the Chrome Web Store or the Firefox Browser Add-ons portal. Verify the publisher is “Enkrypt” and check the total number of downloads exceeds 100,000 to confirm authenticity.
Click “Add to Chrome” (or “Add to Firefox”) and approve the requested permissions. These permissions allow the extension to read and write data on specific cryptocurrency domains like etherscan.io or opensea.io for transaction signing. No permissions grant access to your browsing history or non-crypto sites.
After installation, locate the Enkrypt icon in your browser’s extension toolbar. The icon is a stylized letter “E” with a gradient background. Click this icon to launch the interface. A modal window will appear presenting two primary options: “Create New Account” and “Import Existing Account.” Select “Create New Account” for initial setup.
The application will generate a 12-word secret recovery phrase. Write these 12 words on paper using a permanent pen. Store this paper in a fireproof safe. Do not store the phrase digitally via screenshot, cloud storage, or email. The application will then prompt you to confirm the phrase by selecting the words in the correct order from a randomized list.
Upon successful confirmation, you will set a password. This password encrypts the local storage of your private keys within the browser extension. Use a password manager to generate a password with at least 16 characters, mixing uppercase, lowercase, numbers, and symbols. This password is required each time you unlock the wallet in a new browser session.
Once the password is set, the initial account–labeled “Account 1” by default–is created. The public address, starting with “0x” for Ethereum or with a different prefix for other blockchains, is displayed at the top of the main dashboard. This address is safe to share for receiving funds.
Immediately after creation, navigate to the “Settings” gear icon in the sidebar. Under “Networks,” verify that only the blockchain networks you intend to use are active. By default, Ethereum Mainnet, Polygon, BNB Chain, and Avalanche are enabled. Deactivate any networks you will not use to reduce interface noise and prevent accidental transactions.
Perform a test transaction. Send a minimal amount (e.g., $1 worth of ETH) from an exchange to your new public address. Confirm the receipt in the Enkrypt dashboard. This validates both the address creation and the network connection before depositing larger sums.
Q&A:
I just installed the Enkrypt browser extension, but I’m confused by the first screen. It asks me to either create a new wallet or import an existing one. What exactly happens if I click "Create New Wallet" right now?
Creating a new wallet generates a completely fresh set of cryptographic keys right on your device. The process is fairly direct: after clicking that option, you are immediately asked to set a strong password. This password is used to encrypt your local wallet data on your browser, so you need it every time you open Enkrypt to send funds or view private keys. The next and most critical step is that you will be shown a "Secret Recovery Phrase"—a list of 12 or 24 words. This phrase is the master key to your wallet. You write it down on paper (never screenshot it or store it in a cloud document) and confirm it by selecting the words in the correct order. Only after that confirmation is the wallet technically "created." At this point, your wallet has no funds. It is just an empty set of addresses for various blockchains like Ethereum, Polygon, or Bitcoin. Your account name defaults to "Account 1," and the interface opens to a clean dashboard showing a zero balance.
I see Enkrypt supports multiple networks like Ethereum, BNB Chain, and Polkadot. Do I need to configure each network manually, or are they visible from the start?
Enkrypt comes with a built-in list of popular networks pre-configured and ready to use. When you open the wallet and look at the network selector (usually at the top of the extension window), you will see options like Ethereum Mainnet, Polygon, BNB Smart Chain, Avalanche C-Chain, and a few others. You can switch between them with a single click, and your wallet will automatically display the correct token balances for that chain. For example, switching to Polygon will show your MATIC and any ERC-20 tokens on that chain. If you need to add a less common network—like a testnet, a Layer 2 solution such as Arbitrum Nova, or a custom RPC endpoint—you can do so by scrolling to the bottom of the network list and selecting "Add Network." There, you will have to input the network name, RPC URL, chain ID, currency symbol, and block explorer URL manually. For most users, the default list covers the main chains they will interact with, so no manual configuration is required for standard usage.
I have multiple accounts on another wallet (like MetaMask). Can I import just one specific account into Enkrypt using its private key, and will that affect my already existing Enkrypt wallet?
Yes, you can import a specific account using its private key without overwriting or removing your existing Enkrypt accounts. recover enkrypt wallet allows you to have multiple accounts within the same wallet installation. To do this, open your wallet and look for the account icon or a "Manage Accounts" setting (usually near your account name at the top of the interface). Click on "Add Account" or "Import Account." You will be presented with a few options: import via a private key string, via a JSON keystore file, or via a hardware wallet (like Ledger or Trezor). If you select "Private Key," you paste the long hexadecimal key from your other wallet into the provided field. Enkrypt will then derive the public address from that key and add it as a new account in your list. This imported account will sit alongside your original "Account 1." You can switch between them at any time. There is no merging or conflict—the imported account simply gives you access to its funds and transaction history within Enkrypt. Be careful: anyone who sees your private key gains control of that account.
I’m trying to send a token like USDC from Enkrypt, but when I click "Send," it only shows my native coin (like ETH or BNB). Where is my USDC, and how do I send it?
Enkrypt automatically detects standard tokens like USDC, USDT, and many others for major networks, but the send interface by default opens to the native coin. To send a different token, you first need to select it from the token list inside the wallet. On the main dashboard, you should see all your token balances under your account. Click on the specific token, such as "USDC" or "DAI." This will open a detail page for that token, showing its balance and price. From that detail page, you will see a "Send" button. Clicking that button will open the send interface pre-configured for that token. If you do not see USDC listed on your main dashboard but you know the token exists in your wallet (e.g., it was airdropped to you), you can click "Manage Tokens" or the three-dot menu and then "Add Token." Here, you can paste the token’s contract address (e.g., the USDC contract on Ethereum). Enkrypt will then import and display that token. Once the token is visible, the Send process works the same: enter the recipient address, the amount, adjust gas settings if necessary (by clicking the "Gas" or "Advanced" options), and confirm the transaction. Note that you must always hold a small amount of the network’s native coin (ETH for Ethereum, BNB for BSC) to pay the transaction fee when sending tokens.